Video Transcript for All You Need to Know About the SumoSprings Rebel Contact Plate for Offset Trailer Frames

Hi everybody. Andy here with etrailer.com and today we're gonna take a brief look at the Sumo Springs rebel contact plate for offset trailer frames. These contact plates are going to let you install your Sumo Springs Rebel Helper Springs onto your trailer that has an offset frame rail, so these are going to be for trailers with springs not directly under the frame rail. And these are sold as a pair and you will need one kit per axle. They are made here in the USA. And lemme go ahead and pull out my ruler here and just give you some overall dimensions, beginning with the, what I'm calling the overall length.

It looks like we are sitting pretty close to about four and a half inches long. And then the overall width, we are sitting right at about seven and a quarter inches wide. And then laying these down going for the overall height we're sitting pretty close to two inches tall. And then in case you need to know it, the mounting holes center to center. So I hope you can see there we're sitting right about six and a quarter inches center to center.

Now instructions are included to walk you through the installation process And you're going to get the hardware that you need to install these successfully. And these do have a limited lifetime warranty. And that's gonna conclude our look today. I do hope that it was helpful for you. Again, my name is Andy.

Thank you for joining me.